|
|
|
 |
|
| Cold Steel Austrian Saber (88PSB) |
Points: 18
|
The 1904 Austrian Cavalry Saber was designed by the Inspector General of the Cavalry and, after undergoing a number of minor revisions, was officially adopted for use in 1908. It was issued throughout the Austro-Hungarian Empire and was well received by troopers and officers alike for several reasons.
Sold Out
|
|
|
|
|
|
 |
|
| Cold Steel Civilian Saber (88NSS) |
Points: 20
|
The cavalry saber reached an incomparable level of popularity during the Napoleonic wars. An efficient weapon of war with somewhat heroic overtones, it was used by officers on foot as well as troopers mounted on horseback. It had one drawback. For civilian use, formal, or ceremonial occasions, it was a bit cumbersome, even awkward, as even the lightest models were too heavy and long for practicality. Additionally, the multiple bar hilt, which effectively protected one's hand from an opposing blade, would occasionally catch, snag, or hook on objects it touched in passing.
Sold Out
|
|
|
|
|
|
 |
|
| Cold Steel Prussain Saber (88PSA) |
Points: 18
|
In the mid 1800's the world's armies were in a race to field the most effective cavalry arms. The debates raged regarding the merits of the lance over the saber or vice versa. Additionally there were further disagreements, with some favoring the point oriented weapon and others the edge.
The Prussian response was to equip their exalted cavalry with a saber that tried to strike a perfect balance. Roll forged from high carbon steel with a spring temper, it offered a slightly curved blade with a pipe back (spine) that ran down its length to reinforce the spear point. It had a remarkably effective, pierced basket guard and a sharkskin wrapped grip. It was a light, handy saber that cut efficiently and was diabolical in the thrust because of the added stiffness of its pipe back cross section.
Sold Out
|
|
|
|
|
|
 |
|
| Hanwei Baselard Dagger (SH2460) |
Points: 9
|
The Baselard, in both its shortsword and dagger forms, was a uniquely Swiss weapon as its name suggests. Characterized by its crescent-shaped guard and pommel, the Baselard was long-lived, first appearing in the 13th century and surviving into the 17th century.
Our Baselard Dagger is based on an early 15th century piece and features a single-edged diamond-section blade in 5160 high-carbon steel with a riveted tang. The distinctive hardwood grip is capped with engraved steel guard and pommel plates, and an attractive leather-covered scabbard with a belt-retention ring completes the presentation.
Sold Out
|
|
|
|
|
|
 |
|
| 11th C. Viking forged sword |
Points: 15
|
Viking swords, like the Vikings themselves, have reputations for being brutal and utilitarian devices, simplistic hacking weapons with little in the way of grace or beauty. This view has been perpetuated pop culture. For those who study Viking history and culture, though, they know that is simply not the case. Many Viking weapons that have remained for us to examine were not only functional but beautifully decorated. One such example is this sword, based on a find in Finland that dates back to the 11th
Century.
Sold Out
|
|
|
|
|
|
 |
|
| Two Handed Gothic forged sword |
Points: 15
|
Late 15th century – German. Original found in the Landesmuseum, Zurich.
Type XVIIIa.
This sword was very popular in Germany during the mid to late 15th century. The sword illuminates the artistic creativity of the time, resulting from the Gothic artistic revolution in the arts.
The clear crisp blade and details hexagonal quillions and crisp fishtail pommel attest to this artistic revival.
Comes with leather scabbard.
Sold Out
|
|
|
|
|
|
 |
|
| Two handed Danish forged sword |
Points: 15
|
The history of Denmark is filled with tumultuous periods of war and strife, conflicts driven by the same political and religious factors that were widespread throughout Medieval and Post-Medieval Europe. Smaller kingdoms were swallowed up by larger, and larger kingdoms splintered apart. Due to this fairly colorful history, the Danes became known for some distinctive weaponry, of which this Danish Two-Handed Sword is an example.
This sword is classified as an Oakeshott Type XVIIIe, a very unusual member of the Type XVIII group. It features a long, stiff diamond shaped blade with an extremely long handle, making it suitable for cut and thrust swordplay as many other swords were in the later 15th Century. However, this sword also has a long unsharpened ricasso that can be gripped to shorten up the blade for closer work. This option to fight with the “half sword” makes the Danish Two-Handed Sword an incredibly versatile weapon.
Sword comes with leather scabbard.
Sold Out
|
|
|
|
|
|
 |
|
| Cold Steel US Naval Officer's Sword (Issue Handle) (88MNA) |
Points: 18
|
While we heartily approve of our Armed Forces wearing dress swords and sabers, we thought it was a shame that only unsharpened, poorly tempered wall hangers made of weak stainless steel are all that's available.
That's why we decided to make our own truly battle worthy reproductions. They're faithful in every detail to government specifications; they offer highly polished blades, appropriate etching and quality hilts and scabbards.
The only real changes we have made are to drastically improve their performance as weapons by forging them from 1055 Carbon Steel and properly heat treating them to a tough spring temper before sharpening.
Sold Out
|
|
|
|
|
|
 |
|
| Cold Steel US Naval Officer's Sword (Ray Skin Handle) (88MNAL) |
Points: 18
|
While we heartily approve of our Armed Forces wearing dress swords and sabers, we thought it was a shame that only unsharpened, poorly tempered wall hangers made of weak stainless steel are all that's available.
That's why we decided to make our own truly battle worthy reproductions. They're faithful in every detail to government specifications; they offer highly polished blades, appropriate etching and quality hilts and scabbards.
The only real changes we have made are to drastically improve their performance as weapons by forging them from 1055 Carbon Steel and properly heat treating them to a tough spring temper before sharpening.
Sold Out
|
|
|
|
|
|
 |
|
| Dynasty Forge Small Sword (DF029) |
Points: 15
|
The Dynasty Forge Small Sword has a triangular cross section and a very sharp point. It's a perfect copy of the sword used in 17th century.
High carbon blade is handforged and tempered. Comes complete with a leather scabbard that features an intricately decorated throat and chape.
Sold Out
|
|
|
|
|
|
 |
|
| Cold Steel Training Saber (92BKTTNS) |
Points: 5
|
Training Saber made by Cold Steel. Our Steel Training Saber is deeply curved and fullered, with a blunt edge and tip for training and forgiving spring temper for practice and sparring.
Its heavy duty steel guard has reinforced rolled edges for durability as well as superior hand protection, and its synthetic grip will offer years of use as a dedicated training tool. Light, agile and perfectly balanced, this is a must-have training tool for any historical fencer or HEMA practitioner!
Sold Out
|
|
|
|
|
|
 |
|
| Re-enactment Practice Sword (1346) |
Points: 4
|
Design inspired by a 10th C. model
The Three load practice Viking Sword is made of 2 mm thick 1060 High Carbon Steel and Tempered to a Rockwell of 53. We created this piece with the practitioner in mind. The thick blade gives greater resistance to the blade for theatrical type combat which requires exciting blade to blade contact for shows, theatrical plays and movie productions.
Sold Out
|
|
|
|
|
|
 |
|
| Hanwei Federschwert - Practical Fencing Longsword (SH2333) |
Points: 8
|
Our all new Practical Fencing Longsword (or Federschwert) is based on classical training pieces used in Renaissance Europe. This uniquely styled sword is featured in many period fencing manuals and is rapidly gaining popularity with modern practitioners of European martial arts. Designed in conjunction with the OCHS historic fencing organization in Germany, our Federschwert optimizes all of the balance and flexibility characteristics required for serious pursuit of this historic art.
Sold Out
|
|
|
|
|
|
 |
|
| Hanwei Early Medieval Single Hand - Tinker Pearce Blunt Trainer (SH2405) |
Points: 15
|
The Blunt Trainer early medieval sword features nearly identical handling of its sharp companion, but with thick edges (2mm) and a rounded tip for safe sparring practice.
Tinker Pearce has developed these matching longswords to satisfy the need of every Western Martial Arts practitioner and sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. Teh very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dimantling of the hilt assembly for inspection or to exchange blades if needed.
What others are saying about the Tinker Pearce Longswords:
"I had the opportunity to handle the prototype Tinker Pearce Line Longswords by CAS/Hanwei, and they are beautiful, well-balanced, quick-handling swords at an excellent price. The sharp and blunt versions handle almost identically in cuts, thrusts, and quick posta (guard) transitions. These promise to be the mid-priced training weapon of choice for longsword studies."
Sean Hayes, Maestro d`armi, Northwest Fencing Academy and University of Oregon
Sold Out
|
|
|
|
|
|
 |
|
| Hanwei Hand and a Half Sword - Tinker Pearce Blunt Trainer (SH2401) |
Points: 16
|
Bastard Sword Blunt Trainer designed by Michael `Tinker` Pearce and reproduced by Hanwei to his specifications.
The Blunt Trainer features nearly identical handling of its sharp companion, but with thick edges (2mm) and a rounded tip for safe sparring practice.
Tinker Pearce has developed these matching longswords to satisfy the need of every Western Martial Arts practitioner and sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. Teh very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dimantling of the hilt assembly for inspection or to exchange blades if needed.
What others are saying about the Tinker Pearce Longswords:
"I had the opportunity to handle the prototype Tinker Pearce Line Longswords by CAS/Hanwei, and they are beautiful, well-balanced, quick-handling swords at an excellent price. The sharp and blunt versions handle almost identically in cuts, thrusts, and quick posta (guard) transitions. These promise to be the mid-priced training weapon of choice for longsword studies."
Sean Hayes, Maestro d`armi, Northwest Fencing Academy and University of Oregon
Sold Out
|
|
|
|
|
|
|
|
Tags:
swords, sword, katana, wakizashi, tanto, japanese sword, medieval sword, viking sword, japanese swords, medieval swords, viking swords, knife, knives, saber, armour, movie swords, movie replicas, martial arts, sporting goods, sporting equipment,
|
- New items
- Discounted items
- Add to favorites
